Thermocouple & RTD Instruments

Product Details:

QCA manufactures spring loaded thermo couple with and without extension nipple.

Element types : J and K
Temperature range : Amb to 600 degC
Material : SS316
Element OD : as per customer requirment
Probe lenght : as per customer requirements

Product Details:

Our product line of Mineral Insulated cable can be used under the most severe conditions that can destroy other types of thermocouple cable. Based on our rugged construction and with a large variety of sheath materials available, MI cable can be used in corrosive conditions up to the maximum range of the materials selected.

QCA Mineral Insulated thermocuple can be supplied in long lengths and can be formed or bent to a radius equal to twice the sheath diameter without loss of integrity. It can easily be welded or brazed to other metals when proper techniques are used.

Product Details:

QCA-HI high temperature thermocouples are designed to operate in a temperature range of 600 deg C to 1700 deg C. They are designed to use in vacuum furnaces and other applications requiring high-temperature measurement in controlled atmosphere condition. Metal sheaths of alloy steel and ceramic protection tubes are available. All assemblies are supplied with ungrounded, isolated hot junction.

Additional Information:

• Item Code: QCA-HI

Product Details:

• Indoor and outdoor RTD temperature probes (90.2520)For temperatures between -30 ... +80°C
• Use in air conditioning technology
• Protection class IP20 to IP65
• Measuring insert designed in 2-wire or 3-wire circuitry
• Also available with transmitter 4 ... 20mA or 0 ... 10V

Various plastic device versions are available with different protection classes and temperature ranges to meet the individual measuring task.
The measuring insert is a Pt 100 temperature probe as per DIN EN 60 751, class B in 2-wire circuit as standard. Further available versions: with Pt 1000, Ni 1000 or 2 x Pt 100.
From the connection terminals, wiring in 3-wire and 4-wire circuit is also possible.
A transmitter can be optionally integrated. Applications

 

• Indoor and outdoor RTD temperature probes for air conditioning technology are mainly used for temperature measurement in rooms, halls and outdoors.

Product Details:

JUMO DELOS T - Electronic Temperature Switch with Display and Analog Output (902940)

Features

 

• For temperatures from -50 to +260 °C (500 °C)
• EHEDG certification
• Configuration performed with the rotary encoder on the temperature switch or setup program
• M12 × 1 plug connector; protection type IP67 according to DIN EN 60529 with inserted machine connector
• Positively lit LCD display

 

Applications

 

• Food and pharmaceutical
• CIP/SIP systems
• Mechanical and plant engineering
• Air conditioning and refrigeration applications

Product Details:

QCA-IN series thermocouple sensors are custom industrial sensors designed to suit all industrial applications.
An extensive range of thermocouple elements (K, J, R, T, B), process connections, terminations are available.

QCA-IN sensors are suitable for following industrial applications:

• Automotive industry
• Heat Treatment
• Furnace, Oven and Kilins
• Plastic and Rubber industries

Additional Information:

• Item Code: QCA-IN

Product Details:

Screw-in RTD temperature probes
with terminal head form B

• With replaceable measuring insert
• As single or double RTD temperature probes
• Connection head form B, BUZ, BUZH, BBK
• Available with transmitter

Screw-in RTD temperature probes are mainly used for measuring temperatures in fluids and gasses. A decisive selection criterion is the reliable sealing feature of this installation type with vacuum and with overpressure. The application areas are, among others, in the air conditioning technology and refrigeration engineering as well as the HVAC, kiln and apparatus engineering sector.
The connection head is suitable for temperatures up to +100 °C. The versions BUZ, BUZH and BBK are also available in addition to the standard connection head, form B.
A Pt100 temperature sensing element according to DIN EN 60751, class B in 2-wire circuit is used as a measuring insert by default – versions with Pt500 or Pt1000 are also possible. Connection is available in 3-wire or 4-wire circuit as an option. A transmitter can be optionally integrated into the connection head. Technical data Terminal head Form B DIN 43729, die-cast aluminum, M20 × 1.5; IP65, ambient temperature -40 to +100 °C
Form BUZ, die-cast aluminum, M20 × 1.5; IP65, ambient temperature -40 to +100 °C
Form BUZH, die-cast aluminum, M20 × 1.5; IP65, ambient temperature -40 to +100 °C
Form BBK, plastic, M20 × 1.5; IP54, ambient temperature -30 to +130 °C
Caution: reduced ambient temperature range when using transmitters, data sheets 707010, 707030 and 707060 Extension tube Stainless steel 1.4571, length 130 mm
Process connection Thread, stainless steel 1.4571 Thermowell, stainless steel 1.4571 or steel 1.7335
Thermowell Stainless steel 1.4571, Ø 9 mm, Ø 11 mm, Ø 12 mm Measuring insert Replaceable, Pt100 temperature probe, DIN EN 60751, class B, 2-wire circuit
Response times t0.9 approx. 50 s, in water 0.2 m/s, Ø 9 mm Transmitter analog transmitter, 4 to 20 mA output, data sheet 707030 analog transmitter, 0 to 10 V output, data sheet 707030 programmable transmitter, 4 to 20 mA/20 to 4 mA output, data sheet 707010 Wtrans B programmable head transducer with radio transmission, data sheet 707060 (suitable Wtrans receivers, data sheet 902931) Accessories Thermowell, data sheet 909710

Product Details:

For temperatures between -50 (-200) to +600 °
• Flexible sheath cable with vibration-resistant measuring insert
• As single or double RTD temperature probe in 2-wire, 3-wire, or 4-wire circuit
• Quick response time
• Application-specific insertion length
Due to their specific features, mineral-insulated RTD temperature probes are used in chemical
plants, power plants, pipelines, engine building, test rigs, and any measuring locations requiring
flexibility and simple replacement. Inside the flexible and thin-walled sheathed cable out of
stainless steel, the low ohmic conductor copper wires are embedded in compressed, heat-resistant
magnesium oxide.
The temperature sensor with 2-wire, 3-wire, or 4-wire technology is connected to the conductor
copper wires and installed in the protection tube out of stainless steel. The protection tube and
sheathed cable are welded to one another. The diameters already start at 1.9 mm.
The good thermal transfer between the protection tube and temperature sensor enables short
response times (t0.5 from 0.7 s) and excellent measuring accuracy. The vibration-resistant construction
guarantees a long operating life. The flexible probe tube allows temperature measurements
to be made at measuring points that are difficult to access. The smallest bending radius
is 5 times the outer diameter.
The measuring insert is normally fitted with a Pt100 temperature sensor according to DIN EN
60751, class B in 2-wire circuit; versions with Pt500 or Pt1000 can be ordered as well. The connection
is also available in 3-wire and 4-wire circuits.
Mineral-Insulated RTD Temperature Probe According to DIN EN 60751

Technical data
Terminal head Form B, diecast aluminum, M20 × 1.5; IP65, ambient temperature -40 to +100 °C
Form BUZ, diecast aluminum, M20 × 1.5; IP65, ambient temperature -40 to +100 °C
Form J, diecast aluminum, M16 × 1.5, IP65, ambient temperature -40 to +100 °C
Caution: reduced ambient temperature when using transmitter
Connection Cable ends stripped bare; alternatively available with ferrules, plug-in sleeves, or multi-pole electrical
connectors
Connecting cable Silicone, ambient temperature -50 to +180 °C
PTFE, ambient temperature -190 to +260 °C
Metal braiding, ambient temperature -50 to +350 °C
Process connection Thread, stainless steel 1.4571
Protection tube Stainless steel 1.4571, Ø 1.9 mm, Ø 3 mm, and Ø 6 mm
Adapter sleeve (end closure) As standard, the adapter sleeve (end closure) is designed up to 120 °C; it is available up to 300 °C
upon request.
Measuring insert Pt100/Pt1000 temperature sensor, DIN EN 60751, class B in 2-wire, 3-wire, or 4-wire circuit
Response times In water with 0.4 m/s / in air with 3 m/s
Ø 1.9 mm: water t0.5 = 0.7 s, t0.9 = 2.1 s/air t0.5 = 7.2 s, t0.9 = 20.5 s
Ø 3.0 mm: water t0.5 = 1.3 s, t0.9 = 4.0 s/air t0.5 = 13.5 s, t0.9 = 41.0 s
Ø 6.0 mm: water t0.5 = 5.0 s, t0.9 = 11.5 s/air t0.5 = 37.5 s, t0.9 = 117.5 s
Transmitter Analog transmitter, 4 to 20 mA output, data sheet 707030
Programmable transmitter, 4 to 20 mA / 20 to 4 mA output, data sheet 707010
Programmable transmitter, 4 to 20 mA / 20 to 4 mA and HART®-interface output, data sheet 707010

Product Details:

Screw-in RTD temperature probe with plug connector according to DIN EN 175301

Temperature range from -50 to +260 °C

• Shakeproof design
• Plug connection locked contact stable, protection class IP65
• Available with transmitter
• GL approval for basic type 902044/20 and 902044/21

Screw-in RTD temperature probes in vibration proof design allow temperature measuring under
pressure in motors, compressors, plant engineering and shipbuilding.
The plug connectors between the protection fitting and the connection cable are locked contact
stable and have the protection class IP65 when connected.
The measuring insert is normally fitted with a Pt100 temperature probe according to DIN EN
60751, Class B in 2-wire circuit; versions with Pt500 or Pt1000 can also be supplied.
Connection is available in 2-wire or 4-wire-circuit as an option.
The basic types 902044/25 to 902044/29 are designed with transmitters (output 4 to 20 mA).

Technical Data

Connection Basic type 902044/20, 902044/25 and 902044/28: plug connector DIN EN 175301-803, Pg9
Basic type 902044/21, 902044/26 and 902044/29: plug connector DIN EN 175301-803, Pg11 max. cable cross section 1.5 mm2, IP65, ambient temperature -40 to +125 °C for the versions equipped with transmitter, ambient temperature -40 to +85 °C Process connection Thread, stainless steel 1.4301/1.4571 Thermowell Stainless steel 1.4571, Ø 8 mm, Ø 6 mm stepped down to Ø 3.3 mm, Pressure load max. 50 bar at 200 °C (basic type 902044/20 and 902044/21)
Measuring insert Pt100 temperature probe, DIN EN 60751, cl. B in 2-wire or 4-wire circuit, exchangeable. Shorter fitting lengths in connection with unfavorable fitting conditions (heat dissipation error) can result in an exceedance of the tolerance class.
The measuring insert is not exchangeable for version equipped with transmitter. Protection type IP65 when connected Response times Basic type 902044/20 and 902044/21: t0.5 = 15 s, t0.9 = 45 s, in water with 0.2 m/s, Ø 8 mm Basic type 902044/25 to 902044/29: t0.5 = <2 s, t0.9 = <4 s, in water with 0.2 m/s, Ø 6 mm stepped down to Ø 3.3 mm
Vibration proof design German Lloyd, application category "D“, characteristic line 2 Approval Basic type 902044/20 and 902044/21 GL, German Lloyd
Accessories Thermowell, data sheet 902440