Temperature Instruments

Product Details:

QIS offer various range of Ditigal tmeprature controllers.

Features:

• Auto-Tuning PID: Most appropriate PID constant is automatically reckoned up for control objects. PID constant is calculated when making alteration of setting value, or it is corrected when occurring disturbance/hunting etc
• Blind Function: At the request, desirable parameters screen is only displayed and set up.
• Simplified Timer: On/Off setting control is available after some certain interval. Function of On/Off alarm output is independently usable.
• Priority Display: Demanding parameter screens are monitored and set up under operational mode screen (max. 9 screens)
• Multiple Inputs: Thermocouple/R.T.D. (Pt 100 & JPt 100) are selectable by front key
• Compact Size: It is a compact size. The depth is only 77 mm
• Manual Control (Balance less & Bump less): Manual output function is applicable for versatile applications of instrumentation systems
• Digital PV Filter: For abrupt alteration of input value, filter effect is operational on software
• PID Over-Shoot Protection: It is functional to inhibit PID
• Heating/Cooling Control: PID control is available on cooling
• Other: Shift setting of Off position during On/Off control, for both output 1 & 2

Product Details:

Dual Display Digital Temperature Controller:

Ø Selectable sensor Input (T/C & RTD)
Ø Control action : T.P. control / ON-OFF
Ø Input Signal Conditioning (Digital Filter & Zero Offset)
Ø Programmable Lower and Higher Setpoint Limit Ø Program Lock function
Ø Alarm Acknowledge function
Ø Alarm Inhibit function
Ø Soak timer function
Ø Settable soak time delay
Ø Time Delay for Compressor
Ø Universal supply voltage 90 to 270 VAC
Ø 24 VDC Available on Request 

Product Details:

Wide Temperature Range, High Accuracy, Battery Operated, Selectable Thermocouple between K / J type, MAX / MIN / AVG Recording, Data Hold to Freeze Displayed Data, Backlit Display. Measures Temperature from -50 to 1300°C using K-type Sensor and from -50 to 1200°C using J-type Sensor. Accuracy: ±0.5%.

Product Details:

Hygrostats (Hygrometric) (907032)

For easy two-state control of relative air humidity

• For indoor and duct versions
• Also available with covered setpoint adjuster
• Duct version can be used continuously in areas of high humidity
• Indoor version also suitable for flush-mounted box installation
• With potential-free changeover contact(s)
• No voltage supply required (passive operation)
• Sensing element is maintenance-free when operated in a clean environment

Product Details:

QIS is able to supply superior quality Bimetallic Temperature Gauge. This temperature gauge is made using two different metals (stainless steel & drawn steel) having varied thermal expansion coefficients. Offered product is thoroughly tested on various quality parameters with our in-house testing facilities.

· Nominal Size(mm) -50.. to 0..to..600deg C

· Thread Connection 3/8' BSP & NPT

· Mounting of Gauge Bottom,back, surface, panel

· Case and Bezel Drawn steel and SS 304

· Pressure Elements Bimetal helix

· Wetted Parts SS 304 and SS316

Product Details:

Hygro and Hygrothermal Transducer (Capacitive) for Air Conditioning Applications

For measuring relative air humidity and temperature

• For versatile climatic applications and ventilation
• For indoor and duct versions
• Compact rod models with connecting cable or form J terminal head
• With current and voltage outputs as well as passive Pt100 temperature output
• With fast-response capacitive humidity sensor

Hygro Transducer / Hygrothermal Transducer and CO2 Measuring Probe for Climate Monitoring

For measuring relative humidity and temperature
as well as carbon dioxide concentration

• For building automation, storage rooms, and climate/ventilation control
• Available in the indoor, wall-mounted, and duct version
• Miniature rod version for OEM applications
• With current or voltage outputs as well as passive temperature output
• Hygro thermometer as tabletop/wall-mounted indicator

Product Details:

The humidity and temperature transmitter feel FHT is perfectly suited for precise measurement of ambient conditions in the room or duct. Due to the sensitive measuring element and high-resolution measuring electronics, accuracies of ± 2 % rH and ± 0.3 K are achieved. For convenient commissioning, a snap-in frame or a duct flange is supplied depending on the version. Parameters such as measuring range, unit or output signal can be adapted to the on-site conditions by the user via DIP switch or software. A high-resolution 2.8" TFT display can be selected as an option.

Product Details:

EPC3000 programmable controllersThe EPC3000 range of programmable single loop process and temperature controllers maximizes efficiency and repeatability and is certified for cybersecurity communications robustness
DescriptionAccuracy and Repeatability

Process inputs are fast and accurate, with exceptional thermal stability, aiding precise and consistent control over long periods without calibration drift. Recalibration and user calibration correction functions are available to further improve accuracy.

The industry-leading Eurotherm PID algorithm delivers fast reacting and repeatable control and has been enhanced in the EPC3000 range to further reduce overshoot. Rapid rise to operating temperature and low oscillation helps improve yield. PID settings may be adjusted to suit specific process operating regions, helping deliver optimum performance.

Connectivity and Cybersecurity

The EPC3000 controller range is Ethernet enabled as standard and is the first Eurotherm controller to be designed and certified to meet the stringent cybersecurity requirements of Achilles® Communications Robustness Testing Level 1. Ethernet communications are supported via a standard RJ45 connector, providing fast access to process and diagnostic information as well as connectivity to external PLCs, SCADA systems and IIoT technologies.

Modbus RTU serial communication is also supported.

A PC-based configuration app, Eurotherm iTools, may be downloaded free of charge for use with Ethernet or Serial Modbus, or with an optional USB connector. The USB connector powers the instrument for convenient desktop configuration.

Specification

 

Product Details:

QIS can supply 1", 2", 6", 8" and 10" LED Temperature and Process Display Units.

Input : RTD, TC, 0-10VDC, 4-20mA, Pulse
Output : Relay
LED Size : 1", 2", 4", 6", 8" and 10"
Power supply : 230VAC

Product Details:

iTherm make Jumbo Indicator with Relay output4" x 4 LED's
Features

• Universal Sensor Input
• Programmable Analog Range (-1999 to 9999)
• Programmable Input Signal Conditioning (Digital Filter & Zero Offset)
• Excitation Voltage : 5 VDC / 10 VDC / 12 VDC / 24 VDC
• Program lock function (To prevent unauthorized tampering)
• User Calibration Available for Analog Inputs
• Universal supply voltage ranges from 90 to 270 VAC
• Supply 24 VDC Available on Request

Product Details:

The infrared pyrometer optris CS LT is perfectly suited for temperature measurement in small and narrow environments. The robust measuring heads have been developed for use in temperature ranges from -50°C to 1,030°C and can be employed in ambient temperatures of up to 80°C without additional cooling.

The inexpensive IR pyrometers are perfectly suited for OEM solutions. They also work ideally for multiple employments of infrared measurement points.

Important specifications

 

• Temperature range:
  -50 °C to 1,030 °C
• Spectral range: 8 to 14 µm
• Response time: 14 ms
• Starting at 95 €

Additional Information:

• Delivery Time: Ex. Stock

Product Details:

The infrared pyrometer optris CS LT is perfectly suited for temperature measurement in small and narrow environments. The robust measuring heads have been developed for use in temperature ranges from -40°C to 1,030°C and can be employed in ambient temperatures of up to 80°C without additional cooling.

The inexpensive IR pyrometers are perfectly suited for OEM solutions. They also work ideally for multiple employments of infrared measurement points. The plug version optris CSmed LT additionally allows for a quick assembly and removal, e.g. for regular calibration of medical devices.
Measurement Details


Temperature range (scalable via software): -40°C to 1,030°C
Spectral range: 8 to 14 µm
Optical resolution (90% energy): 15:1
CF-lens (optional): 0.8 mm @ 10 mm
System accuracy (at ambient temperature 23 ± 5°C): ± 1.5% or ± 1.5°C1)
Repeatability (at ambient temperature 23 ± 5°C): ± 0.75% or ± 0.75°C1)
Temperature coefficient: ± 0.05 K/K oder ± 0.05 % K3)
NETD: 0.1 K2)
Response time (90%): 25 ms (adjustable up to 999 s)
Emissivity / Gain (adjustable via 0-10 V DC input or software): 0.100 - 1.100
Transmissivity (adjustable via software): 0.100 - 1.100
Signal processing (parameter adjustable via software):peak hold, valley hold, average, extended hold function with threshold and hysteresis

General Details

Environmental rating: IP 63
Vibration: IEC 68-2-6: 3 G, 11-200 Hz, any axis
Shock: IEC 68-2-27: 50 G, 11 ms, any axis
Weight: 58 g

Electrical Details


Output / analog: 0-5 V or 0-10 V free scalable, thermocouple type K or alarm with adjustable voltage levels
Output / alarm: 0-30 V/50 mA (open collector)
3-state alarm output: adjustable threshold values and voltage level for: no alarm, pre-alarm, alarm
Output/ digital: uni / bidirectional, 9.6 kBaud, 0/3 V digital level / USB optional
Input(0-10V): programmable functional input for external emissivity setting/ambient temperature adjustment, triggered signal output or peak-hold function
LED-functions: alarm indication, automatic aiming support, self diagnostic, temperature indication (via temperature code)
Cable length: 1 m (standard), 3 m, 8 m, 15 m
Power supply: 5-30 V DC
Current draw: 4 mA (without LED) / 10 mA

Versions


Part number: temperature range / spectral range / optics / output

OPTCSLT15: -40-1,030 °C / 8-14 μm / 15:1 / emissivity: 0.95 preset / mV output
OPTCSTCLT15: -40-1,030 °C / 8-14 μm / 15:1 / emissivity: 0.95 preset / mV- or t/c type K output (selectable)

1) object temperature > 0°C; whichever is greater
2) at time constant 100 ms and TObj 25°C
3) for ambient temperatures <18°C and >28°C; whichever is greater

Additional Information:

• Delivery Time: Ex stock

Product Details:

Temperature control is a process in which change of temperature of a space, or of a substance, is measured or otherwise detected, and the passage of heat energy into or out of the space or substance is adjusted to achieve a desired temperature.
Dual Display, Single Set Point Short Depth Temperature Controller, Size : 48 x 48mm [TC533BX]

Product Details:

WIKA make Bimetal Temperature Gauge
Dial Size : 150mm
Stem dia. : 8mm
Stem length : 80mm to 250mm
Window : Instrument Glass
Dial : Aluminium
Pointer : Adjustable pointer
Accuracy : class 1 as per EN13190
Connection : 1/2" BSP

Product Details:

QIS can supply WEST make Temperature Controller

Model : 6100+ 
Input : RTD or Thermocouple
Output : Relay, SSR, 4-20mA, 0-10VDC
Control Type : PID, On/Off
Ramp/Soak function : Yes available
Size : 48 x 48
Power supply : 230VAC

Product Details:

piccolo™ Controller P116 / P108 / P104

General Purpose Temperature and Process Controller

piccolo™ controllers offer precision PID control of temperature and other processes with many advanced features not normally found in this class of controllers.

Description

Features:

• Precision PID control
• Easy to use and apply
• High reliability and quality
• Three year warranty
• Ramp-soak timer and soft start
• Overshoot elimination
• Energy usage estimation
• Heater failure detection
• Modbus RTU digitalm communications
• Digital setpoint retransmission
• Analogue retransmission
• Simplified and customisable operator HMI
• High visibility three colour
• LED display
• Wipedown front fascia
• Recovery point “undo” function
• Configuration adaptor
• iTools Wizard

Designed to offer outstanding performance in an affordable package providing a complete solution for a wide variety of applications, this range guarantees extremely easy access to parameterization and operation in a high quality unit.

Despite their advanced features, the controllers are easy to use and apply and may be customised for ease of operation. Full autotune is provided.

Ramp-soak timer and soft start

A ramp soak timer is provided for time based profiling of temperature sequences. These can be used to gradually vary the temperature in a control zone before maintaining it at a defined level, and is typically used to avoid the dangers of damage due to thermal shock.

Overshoot elimination

The unique cutback system ensures precise control to setpoint and when correctly tuned inhibits temperature overshoot.

Ideal for:

• Precision PID controller
• Plastics Extrusion
• Food and Beverage
• Furnaces and Ovens
• Incubators
• Laboratory equipment

 

Specification

Product Details:

500 Advanced Temperature Controller and Programmer3504, 3508 – Precision control of temperature and process variables

The latest range of advanced process controllers from Eurotherm provide precision control of temperature and a host of other process variables together with an abundance of advanced options making it the most adaptable product in its class.

PID Controller features:

• 2 PID loops
• 50 Programs
• Precision PV input
• Carbon potential
• Maths/logic/timers
• Custom user interface
• Recipes
• Modbus RTU
• Ethernet Modbus TCP
• DeviceNet network

 

Specification

Product Details:

3200 Temperature/ Process Controller3204, 3216, 3208, 32h8 Temperature / Process Controllers

The innovative range of 3200 series controller offers precision control of temperature and other process variables together with a host of advanced features not normally found in this class of controller.

Features:

 

• 8 Segment programmer
• Heater failure detection
• Current monitoring
• Internal timer
• Scrolling text messages
• Recipes
• Modbus comms
• Modbus SP retransmission
• Analog retransmission
• Remote setpoint

Specification

Product Details:

2404, 2408 and 2416 Controller / Programmers

The 2404/2408/2416 is a versatile, high stability temperature or process controller, with self and adaptive tuning, in 1/4 DIN, 1/8 DIN and 1/16 DIN sizes. It comes with a standard 8 segment setpoint programmer, with options for one, four or twenty programs of 16 segments each. It has a modular hardware construction which accommodates a wide range of plug-in modules.

Specification

 

Product Details:

• Single Channel PID Temperature Controller
  • AI-208 / AI-218 / AI-509 / AI-516 / AI-519 / AI-526 / AI-716 / AI-719
• Programmable Single Channel PID Temperature Controller
  • AI-216P / AI-516P / AI-526P / AI-716P / AI-719P
• Multi-channel PID Temperature Controller
  • AI-7048 / AI-70482 
• Input : Universal (RTD, TC, mA, DC Voltage)
• Output : Relay, SSR, mA, DC Voltage
• Control function : On/Off, PID, Ramp/Soak
• Communicaiton : RS-485 Modus protocal

Product Details:

The 305 handheld portable digital thermometer is the "lead in" model of the Quantum range of handhelds. The unit features a large, 3 1/2 digit LCD display and is housed in a rugged molded case with inbuilt stand. The N305 accepts a single "K" type thermocouple via a standard "mini plug" connector. A probe is supplied, 1m long PTFE insulated wire with a bare "bead" tip for fast response.

Details:

    Sensor: K Type Thermocouple (Supplied)
    Adjustment: Offset Adjustment available
    Sampling: 2.5 per second

Product Details:

QIS offers  Jumbo Temperature/Process Indicator accept input RTD, Thermocouple. The Indicator suitable for Temperature.

Type : Microprocesser Large LED display
Display size : 2". 4". 6" and 8"
Digits : 4 (9999 or 999,9)
Input : RTD, TC, mA, mV, DC volts
Size : 120 x 400 mm
Power supply : 230VAC
Transmitter power supply : 24VDC


Quantum also offers multi point indicators and multi zone indicator like Temperature, pressure, flow or all zone temperature or humidity as your requirement of application.
Large display (1”, 2”, 4”, 8”) indicator is available.
The indicator is compact size, priced very competitive. The unit can be drawn from the front for easy servicing.

Product Details:

Thermocouple Cables are manufactured from wire materials which is same as that of thermocouple with standard & special grade limits of error (thermal tolerance) as per ANSI MC 96.1 and CLASS 1, 2 & 3 as per IEC 60584-2. As they are of high accuracy in thermal tolerance, these cables are normally used directly for sensor manufacturing.

Thermocouple Compensating Cable: For certain noble metal thermocouples like S, R, B and also K & N, compensating grade cables are being designed with different metal than those of thermocouple whose accuracy is also limited up to 200 °C. They are used as an extension cables from thermocouple sensor to the control unit.

Insulation Materials : PVC, Silicon Rubber, FEP, PFA, PTFE, KAPTON, Glass Fibre, Ceramic Fibre, 

Wire size : 14, 16,18,20,22, 24, 24M, 30 AWG

Product Details:

The Delta Temperature Controller DTB & DTD Series offers advanced features. In addition to its primary functions the DTB model is equipped with a linear voltage signal output and dual output control. This allows for simultaneous heating and cooling controls in a temperature control system ensuring fast and accurate temperature regulation. Temperature controllers are essential measurement devices used for precise temperature control. They can be categorized into thermocouple type and resistor type controllers. These electronic temperature controllers gather temperature data from sensors and transmit the measured information to the electronic processor for further analysis and control. Get Best Price of Delta DTB4848 Temperature Controller at ₹3900/-

Product Details:

QIS can supply, head mount type Temperature Transmitters

Input : Universal (RTD, TC)
Output : 4-20mA, 2 Wire
Power Supply : 24VDC

Product Details:

JUMO Panel-Mounted Thermostat, Type 606220

• Liquid expansion
• Microswitch with snap-action switch system
• Compact design

JUMO exTHERM-AT

• Can be directly applied in zones 1 and 2 or 21 and 22
• Switching capacity 16 A as standard, optionally 25 A
• Admissible ambient temperature -55 °C to +70 °C
• Thermowell for zone 0 available as an accessory
• Single thermostat and double thermostat

Panel-mounting thermostat, model EM, up to 500 °C

• Fluid expansion
• Self-monitoring
• Safety swtich-off
• 1, 2, 3 or 4 single-pol snap switches possible

JUMO heatTHERM

• Fluid expansion
• Micro switch as snap switch
• Temperature compensation
• Safety switch-off
• Cadmium-free, RoHS conform

Surface-mounting thermostats, model ATH

• Fluid expansion
• Micro switch
• Self-monitoring (STB/STW)
• Safety switch-off (STB/STW)
• Sturdy housing

Surface-mounting twin thermostat, model ATH

• Fluid expansion
• Micro switch
• Self-monitoring (STB/STW)
• Safety switch-off (STB/STW)
• 2 separate measuring and switching systems

JUMO heatTHERM-AT / heatTHERM-DR (603070)

• Liquid expansion
• Microswitch with snap-action switch system
• Temperature compensation
• Push-In® terminals
• UL-approval possible

Flue gas temperature monitor, model STM-RW-2 (60.1540)

• Rod length expansion
• Micro switch
• Automatic reset
• Breaking cut-out
• DIN reg. no. ATW 86205

Surface-Mounted Thermostats, AMTHF (603051) series

• Liquid expansion
• Microswitch with snap-action switch system
• 2, 3, or 4 single-pole switching steps

Product Details:

Newly designed, latest electronic innovative technology Light weight and easy to operate.It have many functions like Emissivity adjustment, Max/Min made, Differential mode, average mode, alarm setting at High&Low at both temperature limits,suitable for many field such as Metallurgy, Petroleum, Railways, Electronic Oven supply, Chemical, Textiles, Rubber, Plastic, Paper making, Food, Medicine Tobacco, Glass, Thermal Power plants as well as energy saving.

Product Details:

• Dual PID auto tuning function: High-speed response of PID control to reach to the desired value fast, low-speed of response of PID control to minimize the overshoot even though response is a little bit slow.
• High display accuracy: ±0.3%(by F.S. value of each input)
• 2-Steps auto tuning control function
• Multi-input function (13 kinds of multi-input selection function): Temperature sensor, voltage and current selection function.
• Various sub output function: Includes in LBA, SBA, 7kinds of alarm output and 4 kinds of alarm option function, PV transmission output(DC4-20mA), RS485 communication output
• Display the decimal point for analog input

Product Details:

Humidity controllers monitor and maintain proper humidity levels in environmental test applications, food storage areas, and electronic equipment rooms.

Features

• Temperature Input : RTD, mA, Volt
• %rH Input : mA, Volt
• PID or On-Off Control for Temperature & rH
• Compressor Control Output with Time Delay
• Programmable Alarm for Temperature & rH
• Low Water Level Input & Door Open Input
• Optional Serial Communication Port
• Universal supply voltage from 90 to 270 VAC
• Supply 24 VDC Available on Request

Product Details:

Autonics TC3YF refrigeration temperature controllers will provide reliable and optimal cooling control with diverse features and functions.
The controller provides on/off control using compressor ouput and with defrost ouput and evaprator fan outputs. Operation cycle programming also possible to protect contents of the refrigirator in case of error.

Features : 
On/Off Control
Thermistor input
3 Digit display
Control ouput for Refrigeration (Compressor output, Compressor + Defrost output, Compressor+Defrost+Evaprator -fan output
Power supply : 100 - 240VAC