Pressure Instruments

Product Details:

Series 21Y Pressure Transducer Product Description :

The pressure transmitters of the 21Y series have no internal seal and a high insulation voltage of 300 VDC, and are extremely resistant to environmental influences. The sophisticated compensation circuit makes it possible to specify a narrow total error band. A wide range of pressure connections and electrical connections are available to choose from.
            Pressure Range      0…2 to 0…1000 bar
                        Accuracy      ±0,5 %FS
                  Signal ouput      4…20 mA, 0…10 V
 Operating Temperature      -40…100°C

Product Details:

CP-111/112 Series Differential Pressure Sensors

 

Configurable intermediary ranges and software or DIP switch configuration

 

0-10 V or 4-20 mA output

 

With or without 10-digits LCD display

 

"1⁄4 turn” system mounting with wall-mount plate

 

Housing with simplified mounting system

 

Solenoid valve for auto-calibration (only on CP111 model)

Product Details:

Danfoss pressure switches are electromechanical controls and limiters, that control the pressure of air and liquids within a given pressure range.

All contact systems in Danfoss regulating units incorporate a "snap-action" system that maintains the contact force until the moment of contact break.

This distinguishes them from competing products in which micro switches are used.

Product Details:

Series 25Y 

• Pressure Ranges
• Accuracy
• Total Error Band
• Interfaces
• Temperature Range

• 0…0,5 to 0…1000 bar
• ±0,25 %FS
• ±0,7 %FS @ -10…80 °C
• 4…20 mA, 0…10 V
• -40…100 °C

Product Description

The pressure transmitters of the 25Y series with a front-flush separating diaphragm are designed for elevated requirements in industrial applications and are supplied with a G1/2" male pressure port. Thanks to its modular concept, this series is highly flexible and makes it possible to realise customer-specific requirements in very little time. The sophisticated compensation circuit makes it possible to specify a narrow total error band.

Product Details:

Series 23SY-Ei

• Pressure Ranges    0…0,1 to 0…1000 bar
• Accuracy  ±0,25 %FS
• Total Error Band ±0,7 %FS @ -10…80 °C
• Interfaces  4…20 mA, 0…10 V

Product Description

The pressure transmitters of the 23SY-Ei series are designed for elevated requirements in industrial applications. Thanks to its modular concept, this series is highly flexible and makes it possible to realise customer-specific requirements in very little time. The sophisticated compensation circuit makes it possible to specify a narrow total error band.

Intrinsically safe – suitable for use in explosive atmospheres.

Product Details:

JUMO MIDAS – Pressure Transmitter (Type 401001)Features

 

• -1 to 1.6 bar – 0 to 100 bar relative
• Elastomer seal
• Compact design: as of 58 mm in length
• High chemical resistance
• Mechanically highly-resilient membrane

 

Customer benefits

 

• Economical
  Type 401001 is the basis of the sensor technology for the JUMO MIDAS pressure transmitter series, which has already proven itself countless times. A largely automatic production sequence (digital compensation and calibration of the sensor module) reduces the production time and manufacturing costs. 
• Process reliable
  The high quality of every pressure transmitter is ensured by a 100 % final inspection within a fully automated measuring and calibration system. The ceramic measuring cell made of aluminum oxide not only performs well in terms of long-term stability that is achieved through the selection of sensor material and a special adjustment process, it also features high overload resistance.

Product Details:

PSAN series digital display pressure sensors can measure and display various types of pressure including gas, liquid and oil. The auto shift function adjusts the pressure level to match the change in the original pressure, providing the stable and accurate output. The sensor also feature various user-friendly functions including zero adjustment, peak value monitering and chattering.

Product Details:

LEO 2 is a compact, micro-processor (µP) controlled, highly accurate and versatile pressure measuring instrument with digital indication. The piezoresistive pressure transducer as the heart of the instrument has gone through extensive pressure- and temperature tests. Its characteristics are stored in the instruments internal EEPROM. The µP of the LEO 2 reads the characteristic values and calculates therefrom the pressure to an accuracy of < 0,1 %FS at room temperature.

The pressure is measured twice per second and displayed. The top display indicates the actual pressure, the bottom display shows the Max.- or Min.- pressure since the last RESET.

Product Details:

Univarsal Process Indicator with Relay output

Ø User Selectable Analog Input
Ø Programmable Analog Range (-1999 to 9999)
Ø Program Lock function Ø User Calibration Available
Ø Universal supply voltage (90 to 270 VAC)
Ø 24 VDC Available on Request
Ø 24 VDC Transmitter Exicitation supply
Ø 2 Alarm Relay

Product Details:

QIS wil supply SS316 Syphon tube for High temperature steam application.

Material of Construction : SS 316

Process Connection : 1/2" BSPM

Length : 0.5m

Product Details:

QIS can supply WINTERS USA make Digital Pressure Gauge
APPLICATIONS:

• Ideal for commercial and industrial applications in both test measurement and general purpose installations

DESCRIPTION & FEATURES:

• Simple 2 button operation
• Reset to zero feature
• Backlight turns on when on/off button is pressed
• Option for display to remain continuously on
• Continuous Peak pressure indication option
• 316L welded diaphragm seal
• Rubber boot is standard
• ASME B40.100 compliant
• RoHS compliant
• ±1% accuracy (±0.5% optional for gauges up to 10,000 psi)
• 5 year warranty
• Digital gauges are useful instruments for reading pressure values and provide fast results with clear visibility. If you’re looking for digital gauges, look no further! Our DPG Digital Pressure Gauge is one of the top-performing digital gauges in the market.

Product Details:

QIS offers JUMO dTRANS p31 - Pressure Transmitter for Higher Medium Temperatures Features


Fully welded stainless steel measuring system, without seals
Optional electrolytic polishing of process connection
Hygienic design

Protection type: IP65/IP67


Customer benefits

Process reliability

A hygienic design, parts that are in contact with the media being made of stainless steel, and a front flush system prevent microbial contamination and therefore guarantee maximum process reliability. The transmitter is based around a piezoresistive measuring cell, which is safe and reliable with high overload resistance and long-term stability.

Versatile

A broad spectrum of measuring ranges and electrical outputs as well as a large number of process connections guarantee variant diversity that can be specifically adapted to any application. Versions are available in a cast option and/or with reduced deviation from characteristic line.


Applications

Sterilizers, autoclaves
Food and beverage industry
Medical technology
Chemical industry
Biotechnology
High-purity water installations

Product Details:

JUMO MIDAS HP - OEM Pressure Transmitter for High Pressure (401005)

The pressure transmitter based on the thin-film strain gauge measuring principle is used to record the relative pressure (0 to 100 bar up to 0 to 600 bar) in liquid and gaseous media.

The pressure transmitter measures the pressure and converts it into an electrical standard signal with a deviation from characteristic line of ≤ 0.5 % from the end value. A 2-wire current signal, 3-wire voltage signal, or a ratiometric output signal can be selected for the electrical signal output. These should be supplied with the appropriate direct voltage (nominal DC 24 V).

Features

• High chemical resistance
• Measuring system resistant to high mechanical loads
• Thin-film technology
• Welded measuring system
• Compact design: as of 57 mm in length
• High bursting strength

Customer benefits

• Economical
  Type 401005 is the high-pressure model in the JUMO MIDAS pressure transmitter range, with sensor technology that has been proven thousands of times over. An almost fully automated production sequence (digital compensation and calibration of the sensor module) reduces the production time and manufacturing costs.

• Process reliability
  The high quality of every pressure transmitter is ensured by the full final inspection within the fully automatic measuring and calibration facility.

• Versatile
  This measuring instrument distinguishes itself through its versatility. Various output signals, different process connections, materials for process connections, and sealing material are available. The standardized features are specified in the data sheet; further features can be implemented upon request.

Applications

• Refrigeration technology
• Compressors
• Commercial vehicles
• Hydraulics

Product Details:

Feature: for fluids and gas

• 0 - 250"mbar to 0 - 600 bar relative / 0 - 600 mbar to 0 - 25 bar absolute
• Welded measuring system
• All commercially available process connections, including hygienic
• Optional linearity: ≤ 0.2 % from end value

Product Details:

Series 21C - High Accuracy Pressure TransmitterProduct Description

The pressure transmitters of the 21C series with ratiometric 0,5...4,5V output combine chip-in-oil measuring cells with conventional electrical connections and pressure connections, making them ideal for industrial use. The transmitters are extremely resistant to environmental influences and deliver accurate measurement results over a temperature range of -40 °C to 125 °C.

ssaryDownloads

Product Details:

Qis can supply Differential pressure Gauge

Dial size : 63mm
Range : 0  - 10 bar
Process connection : 1/4"BSPM
Movement : SS316 or Brass

Product Details:

Pressure Gauge with Diaphragm Seal

• All-Welded Seal to Gauge Design and Seamless Bourdon Tube Provide Fewer Leak Paths than Competitive Models
• Stainless Steel Wetted Parts and Bourdon Tube
• Liquid Fillable Gauge Case with Bladder
• Tamper Resistant Design
• Compact Size to Fit Applications with Space Constrants
• Applications
• Chemical and Petrochemical Processing Plants
• Petrochemical Refineries
• General Processing such as Food and Pharmaceutical

Specificat ions
Accuracy: ± 0.5% of span (grade 2A)
Case Size: 114 mm (4.5") diameter
Process Connection: ½ MNPT bottom connection
Seal Upper Material: 316L stainless steel
Diaphragm Material: 316L stainless steel
System Fill Type: DC200
Operating Temperature: 143°C (225°F)
Hi

Product Details:

QIS can supply Baumer, WIKA make pressure gauge for industrial applicaiton
Dial size : 63/100/150mm
Case material : SS304
Bourdon material : SS304
Socket Material : SS304
Fill fluid : Clycerin 
Process connection : 3/8", 1/2" and 1/4"
Measurment Range : Various

Additional Information:

• Delivery Time: Ex. Stock

Product Details:

Features

Silicon sensor with stainless steel separating diaphragm
Welded measuring system
High bursting strength


Customer benefits


Economical
Type 401006 is based on the sensor technology of the JUMO MIDAS pressure transmitter range, which has been proven thousands of times over. An almost fully automated production process (digital compensation and calibration of the sensor module) reduces production time and manufacturing costs.

Process reliability

The high quality of every pressure transmitter is ensured by the full final inspection within the fully automatic measuring and calibration facility.The process is guaranteed in the first instance by a high burst pressure. However, if the burst pressure is exceeded, the structural design of the pressure transmitter prevents filling oil leakage.

Versatile

This measuring instrument distinguishes itself through its versatility. Various output signals, different process connections, materials for process connections, and sealing material are available. The standardized features are specified in the data sheet; further features can be implemented upon request.


Applications

Use in aggressive media
Refrigeration technology
Compressors
Commercial vehicles
Hydraulics

Product Details:

QIS offers; JUMO DELOS HP - Precision Pressure Transmitter with Switching Contacts and DisplayFeatures

• Measuring range scaling 1:4
• Process-reliability accuracy from 0.15 % of the nominal-value range setpoint value
• Analog output can be freely configured by the user
• Time-saving and simple configuration on the device or with easy-to-use setup program
• Large, vibrant display
• Flexible installation position through display (180°) rotation and subsequent auto-zero
• Rotating case for better readability (+/-160°)

• Product is not intended for export to the USA.

 

Customer benefits

 

• Process reliability
  The stainless steel sensor welded to the process connection has high bursting safety, equivalent in part to 5 times the measuring range. Consequently, the plant is reliably protected against medium leaks in the event of malfunction.

• Uncomplicated and time-saving
  The measuring device can be configured easily to save time, either on site or using an easy-to-use setup program.

• Flexible
  To optimize legibility, configuration, electrical installation, and the implementation of auto-zero, the case of the measuring device can be adjusted by +/-160° and the display by 180° in a user-friendly manner.

 

Applications

• Hydraulic plants
• Machine and plant engineering
• Test benches
• Laboratory equipment

Product Details:

Multi-Range Pressure and Differential Pressure TransmitterFeatures

• 4 measuring ranges adjustable within two basic measuring ranges
• Adjustable attenuation for strongly differing pressures
• Optional plug-in LCD display

 

Customer benefits

• Varied and economical
  The measuring range, output and attenuation are selected using a 9-part DIP switch, which is characterized by its simple configuration. This multi-facetted measuring instrument combines a large number of functions, meaning that versions can be kept to a limit, resulting in a reduction of prices and delivery times being kept to a minimum. The wear-free measuring system provides operation that requires almost no maintenance.

• Compact and simple
  Small but efficient. Thanks to its compact dimensions, this measuring instrument can be installed with ease and takes up very little space. Time is also saved for startup, which is performed simply using a DIP switch.

Applications

• Ventilation
• Air-conditioning
• Clean room technology
• Flue draft mechanisms
• Filter monitoring

Product Details:

To combat hostile environments, this general service gauge is corrosion, weather, and dust resistant. Mounting versatility, excellent readability, and sustained accuracy make this stainless steel design a gauge leader. It can be stem, surface, or flush mounted.

Sustained accuracy and excellent readability are especially important to users of the OMEGA™ general service gauge line. Meeting the requirements of many industrial applications, general service gauges can be used on steam boilers or other pressurized vessels; on pumps and compressors; on many types of industrial machinery; in the chemical, petrochemical, and allied process industries; in power plants; and in pulp and paper mills.

The pressure gauge actuation system in the OMEGA general service gauge line is the standard 316 SS Bourdon tube system, which is engineered to precise tolerances for repeatability and consistent response to pressure fluctuations.

SPECIFICATIONS
Max. Operating Temp.: 66°C (150°F)
Case: Polished Stainless Steel
Window: Polycarbonate Plastic with Neoprene Sealing Gasket
Bourdon Tube: 316 Stainless Steel
Connection: Back or lower, ¼ NPT, 316SS
Dial Size: 2½ or 3½ in
Mounting: Stem, Flange or 'U' Bracket
Accuracy: 1% full scale

Product Details:

QIS can supply IFM make pressure Transmitters for industrial application

Type " PT / PU

Range : -1 ...... 600 Bar Relative

Signal output : 4 - 20mA, 0 - 10VDC and IO Link

Process connectioin : G1/4"

Electrical connection : M12 x 1

Accuracy : <0.05%FS